• Coverage: Up to 5m2 per litre (typically 2-3 uniform coats) • Number of Coats: 2-3 coats • Drying Time: 1-3 days under typical conditions.Drying time may be extended in confined areas such as under floors and in roof spaces or in cold and damp conditions. Allow the previous coat to soak in before applying the next. • Eradication of woodworm and prevention of woodworm, wet and dry rot attack: Brush: Apply to achieve a coverage rate of 3.5 to 5 m2/l of timber (typically 2-3 uniform coats). Apply subsequent coats after the previous has soaked in. Dip: Dip for at least 3 minutes. The application of this product may cause darkening of some timbers. If colour is critical, try a test area first and allow to dry fully to ensure final appearance is acceptable. Treat all replacement timber. Apply to any surfaces cut after treatment. To ensure thorough protection, treat all surfaces. After full drying most glues, fillers and knotting solutions can be used as normal. Ensure timber is fully dry (allow 3 days) before laying plastic floor tiles, foam or rubber-backed carpets, loft insulation, etc. • After use remove as much product as possible from equipment before cleaning with water • Don't waste unwanted paint! Leftover product may be taken to a Community RePaint collection point. Make a small difference to someone else at communityrepaint.org.uk • Do not use or store in extremes of temperature Cuprinol 5 Star Complete Wood Treatment (WB) is a clear, low odour, water based, all purpose treatment to prevent insect attack, re-infestation and protect from fungal decay. Do not use on beehives or bee keeping equipment.
