Roofing

Reinforcement for use with the first coat of the Restec Flexitec 2020 system. This pack contains ~120m2 (~27kg) of 225g/m2 CSM.

Powder hardener for use with Restec Flexitec 2020 resin, primer and balcony sealer.

A fully printed calibrated bucket for making mixes up to 10 litres. Suitable for all Restec liquid and GRP products.

A handy non-contact thermometer ideal for accurately measuring resin and deck temperature to assist with catalysing.

Installed at external corners of the roof in the junction between an upstand fascia and drip trim. Supplied each.

A 150g pack of GRP Roof 1010 Top Coat Winter Accelerator designed to be added to 10kg of GRP Roof 1010 Top Coat. If accelerating 20kg of top coat, two accelerator packs will be required. When using winter accelerators, GRP Roof 1010 Top Coat can be applied in temperatures as low as 1°C (usual 5°C limit). Note - After adding Winter Accelerator, mix thoroughly and add liquid catalyst at the appropriate rates.

A 300g pack of GRP Roof 1010 Base Resin Winter Accelerator designed to be added to 10kg of GRP Roof 1010 Base Resin. If accelerating 20kg of resin, two accelerator packs will be required. When using winter accelerators, GRP Roof 1010 Base Resin can be applied in temperatures as low as 1°C (usual 5°C limit). Note - After adding Winter Accelerator, mix thoroughly and add liquid catalyst at the appropriate rates.

A catalyst dispenser with an 80ml calibrated capacity is used to safely handle liquid catalyst and measure the volume of catalyst. Liquid catalyst is used with the Restec range of GRP systems (note - not Flexitec 2020, which used a powder hardener)

Bandage tape for joints and detailing work. This pack contains 6 No. 18lm long and 75mm wide 450g/m2 CSM for use with Restec's range of liquid and GRP roofing systems.

Reinforcement for use with the base laminate of Restec's range of GRP systems. This pack contains 15m2 of 450g/m2 CSM